root@:~# wget -qO- bench.sh | bash
----------------------------------------------------------------------
CPU model : Intel(R) Xeon(R) CPU E3-1241 v3 @ 3.50GHz
Number of cores : 8
CPU frequency : 1300.456 MHz
Total size of Disk : 914.0 GB (1.9 GB Used)
Total amount of Mem : 15999 MB (123 MB Used)
Total amount of Swap : 2047 MB (0 MB Used)
System uptime : 0 days, 0 hour 3 min
Load average : 0.05, 0.13, 0.06
OS : Ubuntu 18.04.3 LTS
Arch : x86_64 (64 Bit)
Kernel : 4.15.0-91-generic
----------------------------------------------------------------------
I/O speed(1st run) : 432 MB/s
I/O speed(2nd run) : 431 MB/s
I/O speed(3rd run) : 429 MB/s
Average I/O speed : 430.7 MB/s
----------------------------------------------------------------------
Node Name IPv4 address Download Speed
CacheFly 205.234.175.175 88.4MB/s
Linode, Tokyo2, JP 139.162.65.37 6.75MB/s
Linode, Singapore, SG 139.162.23.4 3.67MB/s
Linode, London, UK 176.58.107.39 5.12MB/s
Linode, Frankfurt, DE 139.162.130.8 6.14MB/s
Linode, Fremont, CA 50.116.14.9 52.3MB/s
Softlayer, Dallas, TX 173.192.68.18 41.0MB/s
Softlayer, Seattle, WA 67.228.112.250 47.7MB/s
Softlayer, Frankfurt, DE 159.122.69.4 6.49MB/s
Softlayer, Singapore, SG 119.81.28.170 8.65MB/s
Softlayer, HongKong, CN 119.81.130.170 10.5MB/s
----------------------------------------------------------------------
root@:~# smartctl --all /dev/sda
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-91-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: CT1000MX500SSD1
Serial Number: 2007E28BE01A
LU WWN Device Id: 5 00a075 1e28be01a
Firmware Version: M3CR032
User Capacity: 1,000,204,886,016 bytes [1.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: Solid State Device
Form Factor: 2.5 inches
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ACS-3 T13/2161-D revision 5
SATA Version is: SATA >3.2 (0x1ff), 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Sat Mar 28 03:41:20 2020 PDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x80) Offline data collection activity
was never started.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 30) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x0031) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 100 100 000 Pre-fail Always - 0
5 Reallocated_Sector_Ct 0x0032 100 100 010 Old_age Always - 0
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 27
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 9
171 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
172 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
173 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
174 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 5
180 Unused_Rsvd_Blk_Cnt_Tot 0x0033 000 000 000 Pre-fail Always - 27
183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0
184 End-to-End_Error 0x0032 100 100 000 Old_age Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
194 Temperature_Celsius 0x0022 076 070 000 Old_age Always - 24 (Min/Max 0/30)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 100 100 000 Old_age Always - 0
202 Unknown_SSD_Attribute 0x0030 100 100 001 Old_age Offline - 0
206 Unknown_SSD_Attribute 0x000e 100 100 000 Old_age Always - 0
210 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
246 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 143958177
247 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 1215882
248 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 301139
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Completed [00% left] (0-65535)
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
这是一款QN 洛杉矶机房的独服，价格是$79/month。处理器和内存都中规中矩，但是SSD似乎给了一块全新的美光MX500，还是非常不错的。