phoenixnap dedicated server benchmark

这是一款 E-2276G (010120)套餐的dedicated server, 月费105USD, 主板品牌是supermicro,型号是SYS-5039MC-H12TRF, 机房是Phoenix Node 1

[root@E3-2276 ]#  (curl -s wget.racing/nench.sh | bash; curl -s wget.racing/nench.sh | bash) 2>&1 | tee nench.log
-------------------------------------------------
nench.sh v2019.07.20 -- https://git.io/nench.sh
benchmark timestamp:    2020-08-04 10:07:22 UTC
-------------------------------------------------

Processor: Intel(R) Xeon(R) E-2276G CPU @ 3.80GHz
CPU cores: 12
Frequency: 861.169 MHz
RAM: 62G
Swap: 31G
Kernel: Linux 3.10.0-1062.el7.x86_64 x86_64

Disks:
nvme0n1 931.5G SSD

CPU: SHA256-hashing 500 MB
0.887 seconds
CPU: bzip2-compressing 500 MB
CPU: AES-encrypting 500 MB
0.548 seconds

ioping: seek rate
min/avg/max/mdev = 22.1 us / 140.5 us / 2.97 ms / 65.5 us
ioping: sequential read speed
generated 14.7 k requests in 5.00 s, 3.58 GiB, 2.93 k iops, 733.2 MiB/s

dd: sequential write speed
1st run: 777.24 MiB/s
2nd run: 740.05 MiB/s
3rd run: 773.43 MiB/s
average: 763.58 MiB/s

IPv4 speedtests
your IPv4: 184.95.39.xxxx

Cachefly CDN: 15.87 MiB/s
Leaseweb (NL): 9.01 MiB/s
Softlayer DAL (US): 30.79 MiB/s
Online.net (FR): 15.18 MiB/s
OVH BHS (CA): 29.77 MiB/s

No IPv6 connectivity detected
-------------------------------------------------

-------------------------------------------------
nench.sh v2019.07.20 -- https://git.io/nench.sh
benchmark timestamp: 2020-08-04 10:08:09 UTC
-------------------------------------------------

Processor: Intel(R) Xeon(R) E-2276G CPU @ 3.80GHz
CPU cores: 12
Frequency: 888.769 MHz
RAM: 62G
Swap: 31G
Kernel: Linux 3.10.0-1062.el7.x86_64 x86_64

Disks:
nvme0n1 931.5G SSD

CPU: SHA256-hashing 500 MB
0.891 seconds
CPU: bzip2-compressing 500 MB
CPU: AES-encrypting 500 MB
0.547 seconds

ioping: seek rate
min/avg/max/mdev = 21.6 us / 138.6 us / 2.71 ms / 47.3 us
ioping: sequential read speed
generated 14.4 k requests in 5.00 s, 3.51 GiB, 2.88 k iops, 718.9 MiB/s

dd: sequential write speed
1st run: 739.10 MiB/s
2nd run: 755.31 MiB/s
3rd run: 752.45 MiB/s
average: 748.95 MiB/s

IPv4 speedtests
your IPv4: 184.95.39.xxxx

Cachefly CDN: 16.94 MiB/s
Leaseweb (NL): 10.96 MiB/s
Softlayer DAL (US): 28.83 MiB/s
Online.net (FR): 15.80 MiB/s
OVH BHS (CA): 29.55 MiB/s

No IPv6 connectivity detected
-------------------------------------------------

[root@E3-2276 ]#  smartctl --all /dev/nvme0n1p1
smartctl 7.0 2018-12-30 r4883 [x86_64-linux-3.10.0-1062.el7.x86_64] (local build)
Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org</code>

=== START OF INFORMATION SECTION ===
Model Number: INTEL SSDPE2KX010T8
Serial Number: PHLJ006501CB1P0FGN
Firmware Version: VDV10131
PCI Vendor/Subsystem ID: 0x8086
IEEE OUI Identifier: 0x5cd2e4
Total NVM Capacity: 1,000,204,886,016 [1.00 TB]
Unallocated NVM Capacity: 0
Controller ID: 0
Number of Namespaces: 1
Namespace 1 Size/Capacity: 1,000,204,886,016 [1.00 TB]
Namespace 1 Formatted LBA Size: 512
Namespace 1 IEEE EUI-64: 5cd2e4 1f68240100
Local Time is: Tue Aug 4 06:11:00 2020 EDT
Firmware Updates (0x02): 1 Slot
Optional Admin Commands (0x000e): Format Frmw_DL NS_Mngmt
Optional NVM Commands (0x0006): Wr_Unc DS_Mngmt
Maximum Data Transfer Size: 32 Pages
Warning Comp. Temp. Threshold: 70 Celsius
Critical Comp. Temp. Threshold: 80 Celsius

Supported Power States
St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat
0 + 25.00W - - 0 0 0 0 0 0

Supported LBA Sizes (NSID 0x1)
Id Fmt Data Metadt Rel_Perf
0 + 512 0 2
1 - 4096 0 0

=== START OF SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

SMART/Health Information (NVMe Log 0x02)
Critical Warning: 0x00
Temperature: 34 Celsius
Available Spare: 100%
Available Spare Threshold: 10%
Percentage Used: 0%
Data Units Read: 16,186 [8.28 GB]
Data Units Written: 37,828 [19.3 GB]
Host Read Commands: 182,341
Host Write Commands: 260,938
Controller Busy Time: 0
Power Cycles: 4
Power On Hours: 179
Unsafe Shutdowns: 2
Media and Data Integrity Errors: 0
Error Information Log Entries: 0
Warning Comp. Temperature Time: 0
Critical Comp. Temperature Time: 0

Error Information (NVMe Log 0x01, max 64 entries)
No Errors Logged

点评: 刚用没有太多感受,phoenixnap家的IPMI不能自己挂载iso,必须要发TK让客服挂载,有点麻烦,不过客服的响应速度还是可以的。系统感觉没有WEBNX家的好用。但是还是很便宜的,内存给的多,additional ip也不贵。SSD感觉比WEBNX的那个1.2T的NVME SSD差点。

发表评论

邮箱地址不会被公开。 必填项已用*标注

此站点使用Akismet来减少垃圾评论。了解我们如何处理您的评论数据