分类目录归档:benchmark

WEBNX BF DEAL BENCHMARK

这是webnx黑五的一款特价服务器,原价69USD/M,升级到ECC内存需要加8USD/M


----------------------------------------------------------------------
CPU model : Intel(R) Xeon(R) W-1250 CPU @ 3.30GHz
Number of cores : 12
CPU frequency : 799.986 MHz
Total size of Disk : 1127.8 GB (2.2 GB Used)
Total amount of Mem : 31726 MB (198 MB Used)
Total amount of Swap : 1906 MB (0 MB Used)
System uptime : 0 days, 2 hour 15 min
Load average : 0.00, 0.00, 0.00
OS : Ubuntu 20.04.1 LTS
Arch : x86_64 (64 Bit)
Kernel : 5.4.0-56-generic
----------------------------------------------------------------------
I/O speed(1st run) : 934 MB/s
I/O speed(2nd run) : 948 MB/s
I/O speed(3rd run) : 961 MB/s
Average I/O speed : 947.7 MB/s
----------------------------------------------------------------------
Node Name IPv4 address Download Speed
CacheFly 205.234.175.175 77.4MB/s
Linode, Tokyo2, JP 139.162.65.37 18.3MB/s
Linode, Singapore, SG 139.162.23.4 12.2MB/s
Linode, London, UK 176.58.107.39 17.1MB/s
Linode, Frankfurt, DE 139.162.130.8 15.9MB/s
Linode, Fremont, CA 50.116.14.9 95.2MB/s
Softlayer, Dallas, TX 173.192.68.18 31.9MB/s
Softlayer, Seattle, WA 67.228.112.250 35.4MB/s
Softlayer, Frankfurt, DE 159.122.69.4 9.11MB/s
Softlayer, Singapore, SG 119.81.28.170 8.08MB/s
Softlayer, HongKong, CN 119.81.130.170 9.92MB/s
----------------------------------------------------------------------


[email protected]:~# curl -s wget.racing/nench.sh | bash
-------------------------------------------------
nench.sh v2019.07.20 -- https://git.io/nench.sh
benchmark timestamp: 2020-12-04 16:02:07 UTC
-------------------------------------------------

Processor: Intel(R) Xeon(R) W-1250 CPU @ 3.30GHz
CPU cores: 12
Frequency: 1538.477 MHz
RAM: 30Gi
Swap: 1.9Gi
Kernel: Linux 5.4.0-56-generic x86_64

Disks:
nvme0n1 1.1T SSD

CPU: SHA256-hashing 500 MB
1.822 seconds
CPU: bzip2-compressing 500 MB
2.790 seconds
CPU: AES-encrypting 500 MB
0.538 seconds

ioping: seek rate
min/avg/max/mdev = 24.7 us / 91.2 us / 1.69 ms / 16.5 us
ioping: sequential read speed
generated 23.7 k requests in 5.00 s, 5.80 GiB, 4.75 k iops, 1.16 GiB/s

dd: sequential write speed
1st run: 890.73 MiB/s
2nd run: 886.92 MiB/s
3rd run: 899.31 MiB/s
average: 892.32 MiB/s

No IPv4 connectivity detected

No IPv6 connectivity detected
-------------------------------------------------


[email protected]:~# smartctl --all /dev/nvme0n1p1
smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.4.0-56-generic] (local build)
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Number: INTEL SSDPE2ME012T4
Serial Number: *
Firmware Version: *
PCI Vendor/Subsystem ID: *
IEEE OUI Identifier: *
Controller ID: 0
Number of Namespaces: 1
Namespace 1 Size/Capacity: 1,200,243,695,616 [1.20 TB]
Namespace 1 Formatted LBA Size: 512
Local Time is: Fri Dec 4 09:06:13 2020 MST
Firmware Updates (0x02): 1 Slot
Optional Admin Commands (0x0006): Format Frmw_DL
Optional NVM Commands (0x0006): Wr_Unc DS_Mngmt
Maximum Data Transfer Size: 32 Pages

Supported Power States
St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat
0 + 25.00W - - 0 0 0 0 0 0

Supported LBA Sizes (NSID 0x1)
Id Fmt Data Metadt Rel_Perf
0 + 512 0 2
1 - 512 8 2
2 - 512 16 2
3 - 4096 0 0
4 - 4096 8 0
5 - 4096 64 0
6 - 4096 128 0

=== START OF SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

SMART/Health Information (NVMe Log 0x02)
Critical Warning: 0x00
Temperature: 31 Celsius
Available Spare: 100%
Available Spare Threshold: 10%
Percentage Used: 0%
Data Units Read: 14,170 [7.25 GB]
Data Units Written: 27,832 [14.2 GB]
Host Read Commands: 126,481
Host Write Commands: 244,954
Controller Busy Time: 0
Power Cycles: 9
Power On Hours: 6
Unsafe Shutdowns: 4
Media and Data Integrity Errors: 0
Error Information Log Entries: 0

Error Information (NVMe Log 0x01, max 64 entries)
No Errors Logged

各方面都一如既往的好,还给我整了一块全新的NVME SSE,快乐!

psychz blackfriday special plan benchmark

这是一款psychz blackfriday的特价服务器,24USD一个月,升级到/29加8USD,也就是32USD一个月,下面来看看跑分


----------------------------------------------------------------------
CPU model : Intel(R) Xeon(R) CPU E3-1230 V2 @ 3.30GHz
Number of cores : 8
CPU frequency : 1600.516 MHz
Total size of Disk : 202.4 GB (1.2 GB Used)
Total amount of Mem : 16014 MB (157 MB Used)
Total amount of Swap : 32707 MB (0 MB Used)
System uptime : 0 days, 4 hour 30 min
Load average : 0.00, 0.01, 0.00
OS : Debian GNU/Linux 10
Arch : x86_64 (64 Bit)
Kernel : 4.19.0-9-amd64
----------------------------------------------------------------------
I/O speed(1st run) : 216 MB/s
I/O speed(2nd run) : 221 MB/s
I/O speed(3rd run) : 220 MB/s
Average I/O speed : 219.0 MB/s
----------------------------------------------------------------------
Node Name IPv4 address Download Speed
CacheFly 205.234.175.175 91.2MB/s
Linode, Tokyo2, JP 139.162.65.37 5.03MB/s
Linode, Singapore, SG 139.162.23.4 4.18MB/s
Linode, London, UK 176.58.107.39 5.87MB/s
Linode, Frankfurt, DE 139.162.130.8 3.59MB/s
Linode, Fremont, CA 50.116.14.9 53.6MB/s
Softlayer, Dallas, TX 173.192.68.18 31.3MB/s
Softlayer, Seattle, WA 67.228.112.250 45.9MB/s
Softlayer, Frankfurt, DE 159.122.69.4 5.31MB/s
Softlayer, Singapore, SG 119.81.28.170 6.77MB/s
Softlayer, HongKong, CN 119.81.130.170 5.43MB/s
----------------------------------------------------------------------


[email protected]:~# smartctl --all /dev/sda
smartctl 6.6 2017-11-05 r4594 [x86_64-linux-4.19.0-9-amd64] (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family: Samsung based SSDs
Device Model: Samsung SSD 850 PRO 256GB
Serial Number: *
LU WWN Device Id: *
Firmware Version: EXM02B6Q
User Capacity: 256,060,514,304 bytes [256 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4c
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Sun Nov 29 01:21:24 2020 PST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x53) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 136) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.

SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0
9 Power_On_Hours 0x0032 087 087 000 Old_age Always - 63276
12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 42
177 Wear_Leveling_Count 0x0013 091 091 000 Pre-fail Always - 509
179 Used_Rsvd_Blk_Cnt_Tot 0x0013 100 100 010 Pre-fail Always - 0
181 Program_Fail_Cnt_Total 0x0032 100 100 010 Old_age Always - 0
182 Erase_Fail_Count_Total 0x0032 100 100 010 Old_age Always - 0
183 Runtime_Bad_Block 0x0013 100 100 010 Pre-fail Always - 0
187 Uncorrectable_Error_Cnt 0x0032 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0032 079 047 000 Old_age Always - 21
195 ECC_Error_Rate 0x001a 200 200 000 Old_age Always - 0
199 CRC_Error_Count 0x003e 100 100 000 Old_age Always - 0
235 POR_Recovery_Count 0x0012 099 099 000 Old_age Always - 35
241 Total_LBAs_Written 0x0032 099 099 000 Old_age Always - 91222567855

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]

SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

网络感觉很一般。SSD是三星的850PRO,但是通电时间已经达到了6万小时了。

webnx dedicated server benchmark 2

这是一款US$99的套餐,主板是永擎W480D4U

[[email protected] ~]# bash bench.sh
----------------------------------------------------------------------
CPU model : Intel(R) Xeon(R) W-1270 CPU @ 3.40GHz
Number of cores : 16
CPU frequency : 800.000 MHz
Total size of Disk : 1177.6 GB (1.7 GB Used)
Total amount of Mem : 63875 MB (618 MB Used)
Total amount of Swap : 32063 MB (0 MB Used)
System uptime : 0 days, 0 hour 19 min
Load average : 0.02, 0.11, 0.10
OS : CentOS 7.8.2003
Arch : x86_64 (64 Bit)
Kernel : 3.10.0-1127.el7.x86_64
----------------------------------------------------------------------
I/O speed(1st run) : 836 MB/s
I/O speed(2nd run) : 875 MB/s
I/O speed(3rd run) : 878 MB/s
Average I/O speed : 863.0 MB/s
----------------------------------------------------------------------
Node Name IPv4 address Download Speed
CacheFly 205.234.175.175 98.2MB/s
Linode, Tokyo2, JP 139.162.65.37 20.7MB/s
Linode, Singapore, SG 139.162.23.4 12.3MB/s
Linode, London, UK 176.58.107.39 19.6MB/s
Linode, Frankfurt, DE 139.162.130.8 16.3MB/s
Linode, Fremont, CA 50.116.14.9 90.5MB/s
Softlayer, Dallas, TX 173.192.68.18 45.8MB/s
Softlayer, Seattle, WA 67.228.112.250 45.1MB/s
Softlayer, Frankfurt, DE 159.122.69.4 5.71MB/s
Softlayer, Singapore, SG 119.81.28.170 8.78MB/s
Softlayer, HongKong, CN 119.81.130.170 10.0MB/s
----------------------------------------------------------------------

[[email protected] ~]# curl -s wget.racing/nench.sh | bash
-------------------------------------------------
nench.sh v2019.07.20 -- https://git.io/nench.sh
benchmark timestamp: 2020-10-22 09:15:20 UTC
-------------------------------------------------

Processor: Intel(R) Xeon(R) W-1270 CPU @ 3.40GHz
CPU cores: 16
Frequency: 800.000 MHz
RAM: 62G
Swap: 31G
Kernel: Linux 3.10.0-1127.el7.x86_64 x86_64

Disks:
nvme0n1 1.1T SSD

CPU: SHA256-hashing 500 MB
1.037 seconds
CPU: bzip2-compressing 500 MB
CPU: AES-encrypting 500 MB
0.558 seconds

ioping: seek rate
min/avg/max/mdev = 24.7 us / 92.6 us / 3.04 ms / 38.1 us
ioping: sequential read speed
generated 13.9 k requests in 5.00 s, 3.39 GiB, 2.78 k iops, 694.4 MiB/s

dd: sequential write speed
1st run: 776.29 MiB/s
2nd run: 823.02 MiB/s
3rd run: 822.07 MiB/s
average: 807.13 MiB/s

IPv4 speedtests
your IPv4: 216.18.208.xxxx

Cachefly CDN: 98.35 MiB/s
Leaseweb (NL): 17.43 MiB/s
Softlayer DAL (US): 41.25 MiB/s
Online.net (FR): 17.72 MiB/s
OVH BHS (CA): 26.84 MiB/s

No IPv6 connectivity detected
-------------------------------------------------

[[email protected] ~]# smartctl --all /dev/nvme0n1p1
smartctl 7.0 2018-12-30 r4883 [x86_64-linux-3.10.0-1127.el7.x86_64] (local build)
Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Number: INTEL SSDPE2ME012T4
Serial Number: CVMD7392006A1P2WGN
Firmware Version: 8DV10171
PCI Vendor/Subsystem ID: 0x8086
IEEE OUI Identifier: 0x5cd2e4
Controller ID: 0
Number of Namespaces: 1
Namespace 1 Size/Capacity: 1,200,243,695,616 [1.20 TB]
Namespace 1 Formatted LBA Size: 512
Local Time is: Thu Oct 22 03:17:00 2020 MDT
Firmware Updates (0x02): 1 Slot
Optional Admin Commands (0x0006): Format Frmw_DL
Optional NVM Commands (0x0006): Wr_Unc DS_Mngmt
Maximum Data Transfer Size: 32 Pages

Supported Power States
St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat
0 + 25.00W - - 0 0 0 0 0 0

Supported LBA Sizes (NSID 0x1)
Id Fmt Data Metadt Rel_Perf
0 - 512 0 2
1 - 512 8 2
2 - 512 16 2
3 - 4096 0 0
4 - 4096 8 0
5 - 4096 64 0
6 - 4096 128 0

=== START OF SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

SMART/Health Information (NVMe Log 0x02)
Critical Warning: 0x00
Temperature: 26 Celsius
Available Spare: 100%
Available Spare Threshold: 10%
Percentage Used: 1%
Data Units Read: 66,027,611 [33.8 TB]
Data Units Written: 158,014,789 [80.9 TB]
Host Read Commands: 2,511,863,862
Host Write Commands: 4,072,213,574
Controller Busy Time: 240
Power Cycles: 26
Power On Hours: 16,086
Unsafe Shutdowns: 20
Media and Data Integrity Errors: 0
Error Information Log Entries: 0

Error Information (NVMe Log 0x01, max 64 entries)
No Errors Logged

NVME-SSD的通电时间16,086小时,感觉比较差,凑合着用吧,感觉运气不太好

phoenixnap dedicated server benchmark

这是一款 E-2276G (010120)套餐的dedicated server, 月费105USD, 主板品牌是supermicro,型号是SYS-5039MC-H12TRF, 机房是Phoenix Node 1

[[email protected] ]#  (curl -s wget.racing/nench.sh | bash; curl -s wget.racing/nench.sh | bash) 2>&1 | tee nench.log
-------------------------------------------------
nench.sh v2019.07.20 -- https://git.io/nench.sh
benchmark timestamp:    2020-08-04 10:07:22 UTC
-------------------------------------------------

Processor: Intel(R) Xeon(R) E-2276G CPU @ 3.80GHz
CPU cores: 12
Frequency: 861.169 MHz
RAM: 62G
Swap: 31G
Kernel: Linux 3.10.0-1062.el7.x86_64 x86_64

Disks:
nvme0n1 931.5G SSD

CPU: SHA256-hashing 500 MB
0.887 seconds
CPU: bzip2-compressing 500 MB
CPU: AES-encrypting 500 MB
0.548 seconds

ioping: seek rate
min/avg/max/mdev = 22.1 us / 140.5 us / 2.97 ms / 65.5 us
ioping: sequential read speed
generated 14.7 k requests in 5.00 s, 3.58 GiB, 2.93 k iops, 733.2 MiB/s

dd: sequential write speed
1st run: 777.24 MiB/s
2nd run: 740.05 MiB/s
3rd run: 773.43 MiB/s
average: 763.58 MiB/s

IPv4 speedtests
your IPv4: 184.95.39.xxxx

Cachefly CDN: 15.87 MiB/s
Leaseweb (NL): 9.01 MiB/s
Softlayer DAL (US): 30.79 MiB/s
Online.net (FR): 15.18 MiB/s
OVH BHS (CA): 29.77 MiB/s

No IPv6 connectivity detected
-------------------------------------------------

-------------------------------------------------
nench.sh v2019.07.20 -- https://git.io/nench.sh
benchmark timestamp: 2020-08-04 10:08:09 UTC
-------------------------------------------------

Processor: Intel(R) Xeon(R) E-2276G CPU @ 3.80GHz
CPU cores: 12
Frequency: 888.769 MHz
RAM: 62G
Swap: 31G
Kernel: Linux 3.10.0-1062.el7.x86_64 x86_64

Disks:
nvme0n1 931.5G SSD

CPU: SHA256-hashing 500 MB
0.891 seconds
CPU: bzip2-compressing 500 MB
CPU: AES-encrypting 500 MB
0.547 seconds

ioping: seek rate
min/avg/max/mdev = 21.6 us / 138.6 us / 2.71 ms / 47.3 us
ioping: sequential read speed
generated 14.4 k requests in 5.00 s, 3.51 GiB, 2.88 k iops, 718.9 MiB/s

dd: sequential write speed
1st run: 739.10 MiB/s
2nd run: 755.31 MiB/s
3rd run: 752.45 MiB/s
average: 748.95 MiB/s

IPv4 speedtests
your IPv4: 184.95.39.xxxx

Cachefly CDN: 16.94 MiB/s
Leaseweb (NL): 10.96 MiB/s
Softlayer DAL (US): 28.83 MiB/s
Online.net (FR): 15.80 MiB/s
OVH BHS (CA): 29.55 MiB/s

No IPv6 connectivity detected
-------------------------------------------------
[[email protected] ]#  smartctl --all /dev/nvme0n1p1
smartctl 7.0 2018-12-30 r4883 [x86_64-linux-3.10.0-1062.el7.x86_64] (local build)
Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org</code>

=== START OF INFORMATION SECTION ===
Model Number: INTEL SSDPE2KX010T8
Serial Number: PHLJ006501CB1P0FGN
Firmware Version: VDV10131
PCI Vendor/Subsystem ID: 0x8086
IEEE OUI Identifier: 0x5cd2e4
Total NVM Capacity: 1,000,204,886,016 [1.00 TB]
Unallocated NVM Capacity: 0
Controller ID: 0
Number of Namespaces: 1
Namespace 1 Size/Capacity: 1,000,204,886,016 [1.00 TB]
Namespace 1 Formatted LBA Size: 512
Namespace 1 IEEE EUI-64: 5cd2e4 1f68240100
Local Time is: Tue Aug 4 06:11:00 2020 EDT
Firmware Updates (0x02): 1 Slot
Optional Admin Commands (0x000e): Format Frmw_DL NS_Mngmt
Optional NVM Commands (0x0006): Wr_Unc DS_Mngmt
Maximum Data Transfer Size: 32 Pages
Warning Comp. Temp. Threshold: 70 Celsius
Critical Comp. Temp. Threshold: 80 Celsius

Supported Power States
St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat
0 + 25.00W - - 0 0 0 0 0 0

Supported LBA Sizes (NSID 0x1)
Id Fmt Data Metadt Rel_Perf
0 + 512 0 2
1 - 4096 0 0

=== START OF SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

SMART/Health Information (NVMe Log 0x02)
Critical Warning: 0x00
Temperature: 34 Celsius
Available Spare: 100%
Available Spare Threshold: 10%
Percentage Used: 0%
Data Units Read: 16,186 [8.28 GB]
Data Units Written: 37,828 [19.3 GB]
Host Read Commands: 182,341
Host Write Commands: 260,938
Controller Busy Time: 0
Power Cycles: 4
Power On Hours: 179
Unsafe Shutdowns: 2
Media and Data Integrity Errors: 0
Error Information Log Entries: 0
Warning Comp. Temperature Time: 0
Critical Comp. Temperature Time: 0

Error Information (NVMe Log 0x01, max 64 entries)
No Errors Logged

点评: 刚用没有太多感受,phoenixnap家的IPMI不能自己挂载iso,必须要发TK让客服挂载,有点麻烦,不过客服的响应速度还是可以的。系统感觉没有WEBNX家的好用。但是还是很便宜的,内存给的多,additional ip也不贵。SSD感觉比WEBNX的那个1.2T的NVME SSD差点。

webnx dedicated server benchmark

买了一个webnx Ogden的独服,价格是$109/month, no setup fee, 具体配置如下:

Intel Xeon E-2276G
32GB DDR4 ECC
1.2TB NVMe
1Gbps Port / 100TB
/29 Ipv4
Enable IPMI

打开IPMI发现是ASRock的主板,型号是E3C246D4U,不是supermicro的,据说asrock的主板没有超微的好,不过这个价格也不是很贵。内存是SK Hynix的,型号HMA82GU7CJR8N-VK,感觉也是很一般的,NVME SSD是INTEL SSDPE2ME012T4的,这个NVME SSD,比较奇怪,在网上搜了一下不是长条形的,更像是SATA硬盘。不过intel的固态硬盘肯定不会差的,我还是比较满意的。

跑下分看看

[[email protected]]# wget -qO- bench.sh | bash
----------------------------------------------------------------------
CPU model : Intel(R) Xeon(R) E-2276G CPU @ 3.80GHz
Number of cores : 12
CPU frequency : 799.938 MHz
Total size of Disk : 1177.4 GB (1.5 GB Used)
Total amount of Mem : 31785 MB (383 MB Used)
Total amount of Swap : 15999 MB (0 MB Used)
System uptime : 0 days, 0 hour 1 min
Load average : 0.20, 0.16, 0.06
OS : CentOS 7.7.1908
Arch : x86_64 (64 Bit)
Kernel : 3.10.0-1062.el7.x86_64
----------------------------------------------------------------------
I/O speed(1st run) : 1.0 GB/s
I/O speed(2nd run) : 999 MB/s
I/O speed(3rd run) : 984 MB/s
Average I/O speed : 1002.3 MB/s
----------------------------------------------------------------------
Node Name IPv4 address Download Speed
CacheFly 205.234.175.175 4.74MB/s
Linode, Tokyo2, JP 139.162.65.37 17.9MB/s
Linode, Singapore, SG 139.162.23.4 13.0MB/s
Linode, London, UK 176.58.107.39 18.8MB/s
Linode, Frankfurt, DE 139.162.130.8 16.4MB/s
Linode, Fremont, CA 50.116.14.9 84.2MB/s
Softlayer, Dallas, TX 173.192.68.18 31.4MB/s
Softlayer, Seattle, WA 67.228.112.250 6.04MB/s
Softlayer, Frankfurt, DE 159.122.69.4 7.97MB/s
Softlayer, Singapore, SG 119.81.28.170 7.23MB/s
Softlayer, HongKong, CN 119.81.130.170 8.16MB/s
----------------------------------------------------------------------

[[email protected]]# smartctl --all /dev/nvme0n1p1
smartctl 7.0 2018-12-30 r4883 [x86_64-linux-3.10.0-1062.el7.x86_64] (local build)
Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Number: INTEL SSDPE2ME012T4
Serial Number: CVMD728400581P2WGN
Firmware Version: 8DV101H0
PCI Vendor/Subsystem ID: 0x8086
IEEE OUI Identifier: 0x5cd2e4
Controller ID: 0
Number of Namespaces: 1
Namespace 1 Size/Capacity: 1,200,243,695,616 [1.20 TB]
Namespace 1 Formatted LBA Size: 512
Local Time is: Fri Apr 10 19:32:02 2020 PDT
Firmware Updates (0x02): 1 Slot
Optional Admin Commands (0x0006): Format Frmw_DL
Optional NVM Commands (0x0006): Wr_Unc DS_Mngmt
Maximum Data Transfer Size: 32 Pages

Supported Power States
St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat
0 + 25.00W - - 0 0 0 0 0 0

Supported LBA Sizes (NSID 0x1)
Id Fmt Data Metadt Rel_Perf
0 + 512 0 2
1 - 512 8 2
2 - 512 16 2
3 - 4096 0 0
4 - 4096 8 0
5 - 4096 64 0
6 - 4096 128 0

=== START OF SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

SMART/Health Information (NVMe Log 0x02)
Critical Warning: 0x00
Temperature: 30 Celsius
Available Spare: 100%
Available Spare Threshold: 10%
Percentage Used: 0%
Data Units Read: 911 [466 MB]
Data Units Written: 11,601 [5.93 GB]
Host Read Commands: 28,783
Host Write Commands: 123,836
Controller Busy Time: 0
Power Cycles: 13
Power On Hours: 6
Unsafe Shutdowns: 1
Media and Data Integrity Errors: 0
Error Information Log Entries: 0

Error Information (NVMe Log 0x01, max 64 entries)
No Errors Logged

网络似乎还不错,硬盘通电时间6小时,难道是新的硬盘吗哈哈哈,总体来说还是物有所值,我还是比较满意的。

hivelocity TPA2 datacenter dedicated server benchmark

[[email protected] ~]# wget -qO- bench.sh | bash
----------------------------------------------------------------------
CPU model : Intel(R) Xeon(R) CPU E3-1230 v5 @ 3.40GHz
Number of cores : 8
CPU frequency : 1820.983 MHz
Total size of Disk : 432.8 GB (1.2 GB Used)
Total amount of Mem : 15709 MB (174 MB Used)
Total amount of Swap : 7935 MB (0 MB Used)
System uptime : 0 days, 0 hour 14 min
Load average : 0.00, 0.01, 0.02
OS : CentOS 7.6.1810
Arch : x86_64 (64 Bit)
Kernel : 3.10.0-957.el7.x86_64
----------------------------------------------------------------------
I/O speed(1st run) : 349 MB/s
I/O speed(2nd run) : 344 MB/s
I/O speed(3rd run) : 344 MB/s
Average I/O speed : 345.7 MB/s
----------------------------------------------------------------------
Node Name IPv4 address Download Speed
CacheFly 205.234.175.175 110MB/s
Linode, Tokyo2, JP 139.162.65.37 12.5MB/s
Linode, Singapore, SG 139.162.23.4 9.92MB/s
Linode, London, UK 176.58.107.39 22.4MB/s
Linode, Frankfurt, DE 139.162.130.8 19.8MB/s
Linode, Fremont, CA 50.116.14.9 31.3MB/s
Softlayer, Dallas, TX 173.192.68.18 37.7MB/s
Softlayer, Seattle, WA 67.228.112.250 17.4MB/s
Softlayer, Frankfurt, DE 159.122.69.4 11.5MB/s
Softlayer, Singapore, SG 119.81.28.170 5.39MB/s
Softlayer, HongKong, CN 119.81.130.170 6.45MB/s
----------------------------------------------------------------------

[[email protected]]# smartctl --all /dev/sda
smartctl 7.0 2018-12-30 r4883 [x86_64-linux-3.10.0-957.el7.x86_64] (local build)
Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family: Crucial/Micron BX/MX1/2/3/500, M5/600, 1100 SSDs
Device Model: MICRON_M510DC_MTFDDAK480MBP
Serial Number: 160511B4E42F
LU WWN Device Id: 5 00a075 111b4e42f
Firmware Version: 0013
User Capacity: 480,103,981,056 bytes [480 GB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: Solid State Device
Form Factor: 2.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 6
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Sat Apr 4 04:51:23 2020 EDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status: (0x80) Offline data collection activity
was never started.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 2235) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 6) minutes.
Conveyance self-test routine
recommended polling time: ( 3) minutes.
SCT capabilities: (0x0035) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 100 100 050 Pre-fail Always - 0
5 Reallocate_NAND_Blk_Cnt 0x0032 100 100 001 Old_age Always - 0
9 Power_On_Hours 0x0032 100 100 001 Old_age Always - 26000
12 Power_Cycle_Count 0x0032 100 100 001 Old_age Always - 37
170 Reserved_Block_Count 0x0033 100 100 010 Pre-fail Always - 0
171 Program_Fail_Count 0x0032 100 100 001 Old_age Always - 0
172 Erase_Fail_Count 0x0032 100 100 001 Old_age Always - 0
173 Ave_Block-Erase_Count 0x0033 100 100 000 Pre-fail Always - 31
174 Unexpect_Power_Loss_Ct 0x0032 100 100 001 Old_age Always - 26
184 Error_Correction_Count 0x0033 100 100 050 Pre-fail Always - 0
187 Reported_Uncorrect 0x0032 100 100 001 Old_age Always - 0
188 Command_Timeout 0x0032 100 100 001 Old_age Always - 0
194 Temperature_Celsius 0x0022 072 060 000 Old_age Always - 28 (Min/Max 19/40)
195 Cumulativ_Corrected_ECC 0x003a 100 100 001 Old_age Always - 1498566
197 Current_Pending_Sector 0x0032 100 100 001 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 100 100 001 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 100 100 001 Old_age Always - 0
202 Percent_Lifetime_Remain 0x0018 100 100 001 Old_age Offline - 0
206 Write_Error_Rate 0x000e 100 100 001 Old_age Always - 0
247 Host_Program_Page_Count 0x0032 100 100 000 Old_age Always - 765505467
248 FTL_Program_Page_Count 0x0032 100 100 000 Old_age Always - 484034379

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Vendor (0xff) Completed without error 00% 7157 -
# 2 Vendor (0xff) Completed without error 00% 25 -

SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

可以看出来TPA2机房网络还可以的,SSD速度感觉很一般了,整体配置还行。硬盘的型号是MICRON_M510DC_MTFDDAK480MBP,是美光2015年的老盘了,通电时间26000小时?,运气真是不咋地

ovh.ie vps benchmark

[email protected]:~# wget -qO- bench.sh | bash
----------------------------------------------------------------------
CPU model : Intel Core Processor (Haswell, no TSX)
Number of cores : 1
CPU frequency : 2399.988 MHz
Total size of Disk : 20.1 GB (1.2 GB Used)
Total amount of Mem : 1945 MB (77 MB Used)
Total amount of Swap : 0 MB (0 MB Used)
System uptime : 0 days, 3 hour 17 min
Load average : 0.00, 0.00, 0.00
OS : Ubuntu 18.04.4 LTS
Arch : x86_64 (64 Bit)
Kernel : 4.15.0-72-generic
----------------------------------------------------------------------
I/O speed(1st run) : 185 MB/s
I/O speed(2nd run) : 211 MB/s
I/O speed(3rd run) : 206 MB/s
Average I/O speed : 200.7 MB/s
----------------------------------------------------------------------
Node Name IPv4 address Download Speed
CacheFly 205.234.175.175 11.5MB/s
Linode, Tokyo2, JP 139.162.65.37 4.92MB/s
Linode, Singapore, SG 139.162.23.4 5.81MB/s
Linode, London, UK 176.58.107.39 11.6MB/s
Linode, Frankfurt, DE 139.162.130.8 11.7MB/s
Linode, Fremont, CA 50.116.14.9 9.54MB/s
Softlayer, Dallas, TX 173.192.68.18 8.78MB/s
Softlayer, Seattle, WA 67.228.112.250 6.28MB/s
Softlayer, Frankfurt, DE 159.122.69.4 11.0MB/s
Softlayer, Singapore, SG 119.81.28.170 4.85MB/s
Softlayer, HongKong, CN 119.81.130.170 4.54MB/s
----------------------------------------------------------------------

这是ovh.ie的一台最低配的SSD VPS,好像是3欧元一个月。可以看得出来各方面都很一般了。买这个小鸡主要是弄个ovh账户,以后买独服方便。

ESXi 独服切小鸡成功了

写上一篇博客时,我的独服用ESXi切小鸡网络总是连不上,后来改用PVE就很顺利连上了,后来思考了一下,感觉ESXi可能也不用设置什么网络的,直接桥接母鸡的网卡就OK了,今天测试了一下果然成功了。安装完ESXi以后不用设置任何网络设置,直接创建虚拟机,使用默认的VM network即可,如果安装的是windows,虚拟机创建完以后在控制面板里面设置一下静态ip就可以联网了,如果是ubuntu等Linux,需要在安装系统的时候设置静态ip。

顺便贴一下dedicated.com切出来的小鸡的benchmark

----------------------------------------------------------------------
CPU model : Intel(R) Xeon(R) CPU E3-1271 v3 @ 3.60GHz
Number of cores : 2
CPU frequency : 3599.997 MHz
Total size of Disk : 49.1 GB (7.0 GB Used)
Total amount of Mem : 3945 MB (1815 MB Used)
Total amount of Swap : 3944 MB (0 MB Used)
System uptime : 0 days, 0 hour 10 min
Load average : 1.63, 0.89, 0.38
OS : Ubuntu 18.04.4 LTS
Arch : x86_64 (64 Bit)
Kernel : 4.15.0-91-generic
----------------------------------------------------------------------
I/O speed(1st run) : 233 MB/s
I/O speed(2nd run) : 249 MB/s
I/O speed(3rd run) : 245 MB/s
Average I/O speed : 242.3 MB/s
----------------------------------------------------------------------
Node Name IPv4 address Download Speed
CacheFly 205.234.175.175 93.0MB/s
Linode, Tokyo2, JP 139.162.65.37 12.7MB/s
Linode, Singapore, SG 139.162.23.4 5.70MB/s
Linode, London, UK 176.58.107.39 9.61MB/s
Linode, Frankfurt, DE 139.162.130.8 8.26MB/s
Linode, Fremont, CA 50.116.14.9 78.0MB/s
Softlayer, Dallas, TX 173.192.68.18 67.4MB/s
Softlayer, Seattle, WA 67.228.112.250 77.4MB/s
Softlayer, Frankfurt, DE 159.122.69.4 5.27MB/s
Softlayer, Singapore, SG 119.81.28.170 13.0MB/s
Softlayer, HongKong, CN 119.81.130.170 15.4MB/s
----------------------------------------------------------------------

这款独服用的SSD是三星850PRO,可以看的出来,开出来的小鸡的SSD I/O比母鸡差了一点

QuadraNet dedicated server(LA) benchmark

[email protected]:~# wget -qO- bench.sh | bash
----------------------------------------------------------------------
CPU model : Intel(R) Xeon(R) CPU E3-1241 v3 @ 3.50GHz
Number of cores : 8
CPU frequency : 1300.456 MHz
Total size of Disk : 914.0 GB (1.9 GB Used)
Total amount of Mem : 15999 MB (123 MB Used)
Total amount of Swap : 2047 MB (0 MB Used)
System uptime : 0 days, 0 hour 3 min
Load average : 0.05, 0.13, 0.06
OS : Ubuntu 18.04.3 LTS
Arch : x86_64 (64 Bit)
Kernel : 4.15.0-91-generic
----------------------------------------------------------------------
I/O speed(1st run) : 432 MB/s
I/O speed(2nd run) : 431 MB/s
I/O speed(3rd run) : 429 MB/s
Average I/O speed : 430.7 MB/s
----------------------------------------------------------------------
Node Name IPv4 address Download Speed
CacheFly 205.234.175.175 88.4MB/s
Linode, Tokyo2, JP 139.162.65.37 6.75MB/s
Linode, Singapore, SG 139.162.23.4 3.67MB/s
Linode, London, UK 176.58.107.39 5.12MB/s
Linode, Frankfurt, DE 139.162.130.8 6.14MB/s
Linode, Fremont, CA 50.116.14.9 52.3MB/s
Softlayer, Dallas, TX 173.192.68.18 41.0MB/s
Softlayer, Seattle, WA 67.228.112.250 47.7MB/s
Softlayer, Frankfurt, DE 159.122.69.4 6.49MB/s
Softlayer, Singapore, SG 119.81.28.170 8.65MB/s
Softlayer, HongKong, CN 119.81.130.170 10.5MB/s
----------------------------------------------------------------------

[email protected]:~# smartctl --all /dev/sda
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-91-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Device Model: CT1000MX500SSD1
Serial Number: 2007E28BE01A
LU WWN Device Id: 5 00a075 1e28be01a
Firmware Version: M3CR032
User Capacity: 1,000,204,886,016 bytes [1.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: Solid State Device
Form Factor: 2.5 inches
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ACS-3 T13/2161-D revision 5
SATA Version is: SATA >3.2 (0x1ff), 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Sat Mar 28 03:41:20 2020 PDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status: (0x80) Offline data collection activity
was never started.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 30) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x0031) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 100 100 000 Pre-fail Always - 0
5 Reallocated_Sector_Ct 0x0032 100 100 010 Old_age Always - 0
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 27
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 9
171 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
172 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
173 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
174 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 5
180 Unused_Rsvd_Blk_Cnt_Tot 0x0033 000 000 000 Pre-fail Always - 27
183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0
184 End-to-End_Error 0x0032 100 100 000 Old_age Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
194 Temperature_Celsius 0x0022 076 070 000 Old_age Always - 24 (Min/Max 0/30)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 100 100 000 Old_age Always - 0
202 Unknown_SSD_Attribute 0x0030 100 100 001 Old_age Offline - 0
206 Unknown_SSD_Attribute 0x000e 100 100 000 Old_age Always - 0
210 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
246 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 143958177
247 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 1215882
248 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 301139

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]

SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Completed [00% left] (0-65535)
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

这是一款QN 洛杉矶机房的独服,价格是$79/month。处理器和内存都中规中矩,但是SSD似乎给了一块全新的美光MX500,还是非常不错的。

hivelocity.net dedicated server benchmark

选的是这一款特价套餐(LAX2 (Los Angeles, CA)):

Quad-Core E3-1230 v5 3.5GHz Kaby Lake Xeon – Outlet Page Server
16 GB DDR4 RAM
480 GB SSD
20TB on 1Gbps
IPMI
10GB Cloud Storage
Instantly Deploy- $80/month, $0/setup (as low as $56/mo)

[[email protected] ~]# wget -qO- bench.sh | bash
----------------------------------------------------------------------
CPU model : Intel(R) Xeon(R) CPU E3-1230 v5 @ 3.40GHz
Number of cores : 8
CPU frequency : 838.586 MHz
Total size of Disk : 432.8 GB (1.5 GB Used)
Total amount of Mem : 15709 MB (245 MB Used)
Total amount of Swap : 7935 MB (0 MB Used)
System uptime : 0 days, 0 hour 12 min
Load average : 0.65, 0.23, 0.09
OS : CentOS 7.7.1908
Arch : x86_64 (64 Bit)
Kernel : 3.10.0-1062.el7.x86_64
----------------------------------------------------------------------
I/O speed(1st run) : 424 MB/s
I/O speed(2nd run) : 428 MB/s
I/O speed(3rd run) : 418 MB/s
Average I/O speed : 423.3 MB/s
----------------------------------------------------------------------
Node Name IPv4 address Download Speed
CacheFly 205.234.175.175 102MB/s
Linode, Tokyo2, JP 139.162.65.37 4.18MB/s
Linode, Singapore, SG 139.162.23.4 2.87MB/s
Linode, London, UK 176.58.107.39 8.93MB/s
Linode, Frankfurt, DE 139.162.130.8 8.36MB/s
Linode, Fremont, CA 50.116.14.9 106MB/s
Softlayer, Dallas, TX 173.192.68.18 10.7MB/s
Softlayer, Seattle, WA 67.228.112.250 4.65MB/s
Softlayer, Frankfurt, DE 159.122.69.4 2.62MB/s
Softlayer, Singapore, SG 119.81.28.170 2.95MB/s
Softlayer, HongKong, CN 119.81.130.170 4.39MB/s
----------------------------------------------------------------------

[[email protected] ~]# hdparm -Tt /dev/mapper/vg1-root

/dev/mapper/vg1-root:
Timing cached reads: 32990 MB in 1.98 seconds = 16623.37 MB/sec
Timing buffered disk reads: 1594 MB in 3.00 seconds = 531.25 MB/sec

[[email protected] ~]# smartctl --all /dev/sda
smartctl 7.0 2018-12-30 r4883 [x86_64-linux-3.10.0-1062.el7.x86_64] (local build)
Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family: Phison Driven SSDs
Device Model: KINGSTON SEDC400S37480G
Serial Number: 50026B72760536BE
LU WWN Device Id: 5 0026b7 2760536be
Firmware Version: SAFM02.H
User Capacity: 480,103,981,056 bytes [480 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Form Factor: 2.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-2 (minor revision not indicated)
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Wed Mar 25 10:50:59 2020 EDT
SMART support is: Available – device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 30) seconds.
Offline data collection
capabilities: (0x79) SMART execute Offline immediate.
No Auto Offline data collection support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 2) minutes.
Conveyance self-test routine
recommended polling time: ( 3) minutes.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 050 Pre-fail Always – 0
2 Not_In_Use 0x0005 100 100 050 Pre-fail Offline – 0
3 Not_In_Use 0x0007 100 100 050 Pre-fail Always – 0
5 Retired_Block_Count 0x0013 100 100 050 Pre-fail Always – 0
7 Not_In_Use 0x000b 100 100 050 Pre-fail Always – 0
8 Not_In_Use 0x0005 100 100 050 Pre-fail Offline – 0
9 Power_On_Hours 0x0012 100 100 000 Old_age Always – 21080
12 Power_Cycle_Count 0x0012 100 100 000 Old_age Always – 38
168 SATA_Phy_Error_Count 0x0012 100 100 000 Old_age Always – 0
170 Bad_Blk_Ct_Erl/Lat 0x0003 100 100 010 Pre-fail Always – 0/704
173 MaxAvgErase_Ct 0x0012 100 100 000 Old_age Always – 205 (Average 137)
175 Not_In_Use 0x0013 100 100 050 Pre-fail Always – 0
187 Reported_Uncorrect 0x0012 100 100 000 Old_age Always – 0
192 Unsafe_Shutdown_Count 0x0012 100 100 000 Old_age Always – 24
194 Temperature_Celsius 0x0023 068 055 030 Pre-fail Always – 32 (Min/Max 22/45)
196 Not_In_Use 0x0002 100 100 010 Old_age Always – 0
197 Not_In_Use 0x0032 100 100 000 Old_age Always – 0
199 CRC_Error_Count 0x000b 100 100 050 Pre-fail Always – 0
218 CRC_Error_Count 0x000b 100 100 050 Pre-fail Always – 0
231 SSD_Life_Left 0x0013 100 100 000 Pre-fail Always – 96
233 Flash_Writes_GiB 0x000b 100 100 000 Pre-fail Always – 72004
240 Not_In_Use 0x0013 100 100 000 Pre-fail Always – 0
241 Lifetime_Writes_GiB 0x0012 100 100 000 Old_age Always – 21265
242 Lifetime_Reads_GiB 0x0012 100 100 000 Old_age Always – 8752
244 Average_Erase_Count 0x0002 100 100 000 Old_age Always – 137
245 Max_Erase_Count 0x0002 100 100 000 Old_age Always – 205
246 Total_Erase_Count 0x0012 100 100 000 Old_age Always – 18597568

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]

SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

[[email protected] ~]# smartctl –all /dev/sdb
smartctl 7.0 2018-12-30 r4883 [x86_64-linux-3.10.0-1062.el7.x86_64] (local build)
Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family: Seagate Constellation ES (SATA 6Gb/s)
Device Model: ST1000NM0011
Serial Number: Z1N3GWPV
LU WWN Device Id: 5 000c50 04fbd0469
Add. Product Id: DELL(tm)
Firmware Version: PA08
User Capacity: 1,000,204,886,016 bytes [1.00 TB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 3.0, 3.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Wed Mar 25 10:51:05 2020 EDT
SMART support is: Available – device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 600) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 149) minutes.
Conveyance self-test routine
recommended polling time: ( 3) minutes.
SCT capabilities: (0x10bd) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 083 063 044 Pre-fail Always – 203618471
3 Spin_Up_Time 0x0003 094 094 000 Pre-fail Always – 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age Always – 44
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always – 6
7 Seek_Error_Rate 0x000f 074 060 030 Pre-fail Always – 17280776616
9 Power_On_Hours 0x0032 056 056 000 Old_age Always – 39169
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always – 0
12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always – 43
184 End-to-End_Error 0x0032 100 100 099 Old_age Always – 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always – 0
188 Command_Timeout 0x0032 100 100 000 Old_age Always – 0
189 High_Fly_Writes 0x003a 100 100 000 Old_age Always – 0
190 Airflow_Temperature_Cel 0x0022 072 060 045 Old_age Always – 28 (Min/Max 20/28)
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always – 0
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always – 38
193 Load_Cycle_Count 0x0032 099 099 000 Old_age Always – 3243
194 Temperature_Celsius 0x0022 028 040 000 Old_age Always – 28 (0 20 0 0 0)
195 Hardware_ECC_Recovered 0x001a 119 099 000 Old_age Always – 203618471
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always – 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline – 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always – 0
240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline – 37110 (6 142 0)
241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline – 3020952145
242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline – 2446486215

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 20 –
# 2 Extended offline Completed without error 00% 19 –
# 3 Short offline Completed without error 00% 17 –
# 4 Short offline Completed without error 00% 4 –
# 5 Extended offline Completed without error 00% 3 –
# 6 Short offline Completed without error 00% 1 –

SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

网络似乎有点差,到欧洲的速度比较慢,美国除了LA的其他地区也比较慢,感觉比linode差远了,还好没有买年付的plan。硬盘通电时间也比较长了,很奇怪的是多给了我一块HDD。练练手,艹完扔吧