这是webnx黑五的一款特价服务器，原价69USD/M，升级到ECC内存需要加8USD/M
----------------------------------------------------------------------
CPU model : Intel(R) Xeon(R) W-1250 CPU @ 3.30GHz
Number of cores : 12
CPU frequency : 799.986 MHz
Total size of Disk : 1127.8 GB (2.2 GB Used)
Total amount of Mem : 31726 MB (198 MB Used)
Total amount of Swap : 1906 MB (0 MB Used)
System uptime : 0 days, 2 hour 15 min
Load average : 0.00, 0.00, 0.00
OS : Ubuntu 20.04.1 LTS
Arch : x86_64 (64 Bit)
Kernel : 5.4.0-56-generic
----------------------------------------------------------------------
I/O speed(1st run) : 934 MB/s
I/O speed(2nd run) : 948 MB/s
I/O speed(3rd run) : 961 MB/s
Average I/O speed : 947.7 MB/s
----------------------------------------------------------------------
Node Name IPv4 address Download Speed
CacheFly 205.234.175.175 77.4MB/s
Linode, Tokyo2, JP 139.162.65.37 18.3MB/s
Linode, Singapore, SG 139.162.23.4 12.2MB/s
Linode, London, UK 176.58.107.39 17.1MB/s
Linode, Frankfurt, DE 139.162.130.8 15.9MB/s
Linode, Fremont, CA 50.116.14.9 95.2MB/s
Softlayer, Dallas, TX 173.192.68.18 31.9MB/s
Softlayer, Seattle, WA 67.228.112.250 35.4MB/s
Softlayer, Frankfurt, DE 159.122.69.4 9.11MB/s
Softlayer, Singapore, SG 119.81.28.170 8.08MB/s
Softlayer, HongKong, CN 119.81.130.170 9.92MB/s
----------------------------------------------------------------------
root@:~# curl -s wget.racing/nench.sh | bash
-------------------------------------------------
nench.sh v2019.07.20 -- https://git.io/nench.sh
benchmark timestamp: 2020-12-04 16:02:07 UTC
-------------------------------------------------
Processor: Intel(R) Xeon(R) W-1250 CPU @ 3.30GHz
CPU cores: 12
Frequency: 1538.477 MHz
RAM: 30Gi
Swap: 1.9Gi
Kernel: Linux 5.4.0-56-generic x86_64
Disks:
nvme0n1 1.1T SSD
CPU: SHA256-hashing 500 MB
1.822 seconds
CPU: bzip2-compressing 500 MB
2.790 seconds
CPU: AES-encrypting 500 MB
0.538 seconds
ioping: seek rate
min/avg/max/mdev = 24.7 us / 91.2 us / 1.69 ms / 16.5 us
ioping: sequential read speed
generated 23.7 k requests in 5.00 s, 5.80 GiB, 4.75 k iops, 1.16 GiB/s
dd: sequential write speed
1st run: 890.73 MiB/s
2nd run: 886.92 MiB/s
3rd run: 899.31 MiB/s
average: 892.32 MiB/s
No IPv4 connectivity detected
No IPv6 connectivity detected
-------------------------------------------------
root@:~# smartctl --all /dev/nvme0n1p1
smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.4.0-56-generic] (local build)
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Number: INTEL SSDPE2ME012T4
Serial Number: *
Firmware Version: *
PCI Vendor/Subsystem ID: *
IEEE OUI Identifier: *
Controller ID: 0
Number of Namespaces: 1
Namespace 1 Size/Capacity: 1,200,243,695,616 [1.20 TB]
Namespace 1 Formatted LBA Size: 512
Local Time is: Fri Dec 4 09:06:13 2020 MST
Firmware Updates (0x02): 1 Slot
Optional Admin Commands (0x0006): Format Frmw_DL
Optional NVM Commands (0x0006): Wr_Unc DS_Mngmt
Maximum Data Transfer Size: 32 Pages
Supported Power States
St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat
0 + 25.00W - - 0 0 0 0 0 0
Supported LBA Sizes (NSID 0x1)
Id Fmt Data Metadt Rel_Perf
0 + 512 0 2
1 - 512 8 2
2 - 512 16 2
3 - 4096 0 0
4 - 4096 8 0
5 - 4096 64 0
6 - 4096 128 0
=== START OF SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
SMART/Health Information (NVMe Log 0x02)
Critical Warning: 0x00
Temperature: 31 Celsius
Available Spare: 100%
Available Spare Threshold: 10%
Percentage Used: 0%
Data Units Read: 14,170 [7.25 GB]
Data Units Written: 27,832 [14.2 GB]
Host Read Commands: 126,481
Host Write Commands: 244,954
Controller Busy Time: 0
Power Cycles: 9
Power On Hours: 6
Unsafe Shutdowns: 4
Media and Data Integrity Errors: 0
Error Information Log Entries: 0
Error Information (NVMe Log 0x01, max 64 entries)
No Errors Logged
各方面都一如既往的好，还给我整了一块全新的NVME SSE，快乐！